Nortel Networks 8000 User Manual
Page 357
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
8 Frame relay configuration
# Configure the FR interface Serial 1/0/0.
[RouterA] interface serial 1/0/0
[RouterA-Serial1/0/0] link-protocol fr
[RouterA-Serial1/0/0] fr interface-type dce
[RouterA-Serial1/0/0] fr dlci 100
[RouterA-fr-dlci-Serial1/0/0-100] quit
[RouterA-Serial1/0/0] quit
# Configure the IP interface Serial 2/0/0.
[RouterA] interface serial 2/0/0
[RouterA-Serial2/0/0] ip address 10.120.20.1 255.255.255.0
[RouterA-Serial2/0/0] quit
# Configure the Tunnel interface.
[RouterA] interface tunnel 2/0/1
[RouterA-Tunnel2/0/1] ip address 10.120.2.5 24
[RouterA-Tunnel2/0/1] source 10.120.20.1
[RouterA-Tunnel2/0/1] destination 10.120.20.2
# Configure the FR over IP.
[RouterA] interface serial 1/0/0
[RouterA-Serial1/0/0] fr dlci-switch 100 interface tunnel 2/0/1 dlci 200
[RouterA-Serial1/0/0] quit
Step 2
Configure Router B.
# Enable FR switching.
[RouterB] fr switching
# Configure the FR interface Serial 1/0/0.
[RouterB] interface serial 1/0/0
[RouterB-Serial1/0/0] link-protocol fr
[RouterB-Serial1/0/0] fr interface-type dce
[RouterB-Serial1/0/0] fr dlci 300
[RouterB-fr-dlci-Serial1/0/0-300] quit
[RouterB-Serial1/0/0] quit
# Configure the IP interface Serial 2/0/0.
[RouterB] interface serial 2/0/0
[RouterB-Serial2/0/0] ip address 10.120.20.2 255.255.255.0
[RouterB-Serial2/0/0] quit
# Configure the Tunnel interface.
[RouterB] interface tunnel 2/0/1
[RouterB-Tunnel2/0/1] ip address 10.120.21.3 24.
[RouterB-Tunnel2/0/1] source 10.120.20.2
[RouterB-Tunnel2/0/1] destination 10.120.20.1
[RouterB-Tunnel2/0/1] quit
# Configure the FR over IP.
[RouterB] interface serial 1/0/0
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
8-67