Logical interface configuration, About this chapter, 4 pos and cpos interface configuration -1 – Nortel Networks 8000 User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
5 Logical interface configuration
5
Logical interface configuration
About this chapter
The following table shows the contents of this chapter.
Section
Description
5.1 Introduction
This section describes various logical interfaces.
This section describes how to configure a sub-interface.
See Example for configuring the sub-interface.
This section describes how to configure a virtual
template.
See Example for configuring the virtual template.
5.4 Configuring virtual
ethernet interfaces
This section describes how to configure a virtual Ethernet
interface.
This section describes how to configure a loopback
interface.
See Example for configuring the loopback interface.
5.6 Configuring a null
interface
This section describes how to configure a null interface.
5.7 Configuration examples
This section provides several configuration examples of
logical interfaces.
5.8 Troubleshooting
This section describes how to diagnose and remove
logical interface faults.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
5-1