Configuration files – Nortel Networks 8000 User Manual
Page 347
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
8 Frame relay configuration
[RouterC] fr switch pvc2 interface Serial1/0/0 dlci 300 interface Serial2/0/0 dlci 200
[RouterC-fr-switching-pvc2] quit
Step 4
Configure Router D.
# Configure Serial 2/0/0.
[RouterD] interface serial 2/0/0
[RouterD-Serial2/0/0] link-protocol fr
[RouterD-Serial2/0/0] ip address 196.1.1.2 255.255.255.0
[RouterD-Serial2/0/0] quit
Step 5
Verify the configuration.
Run the
display fr switch-table all
command to view the configuration and status of the
switching PVC.
Total PVC switch records:1
PVC-Name
Status Interface(Dlci) <-----
pvc1
Active Serial1/0/0(100)
> Interface(Dlci)
Serial2/0/0(300)
# The configuration succeeds when Router A and Router D can successfully ping each other,
it means.
—End
Configuration files
•
Configuration file of Router A
#
sysname RouterA
#
interface Serial1/0/0
link-protocol fr
ip address 196.1.1.1 255.255.255.0
#
return
•
Configuration file of Router B
#
sysname RouterB
#
fr switching
#
interface Serial1/0/0
link-protocol fr
fr interface-type dce
fr dlci 100
#
interface Serial2/0/0
link-protocol fr
fr interface-type nni
fr dlci 300
#
fr switch pvc1 interface Serial1/0/0 dlci 100 interface Serial2/0/0 dlci 300
#
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
8-57