Nortel Networks 8000 User Manual
Page 182
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6 PPP and MP configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
[RouterA-Serial1/0/1] ppp authentication-mode pap
[RouterA-Serial1/0/1] ppp pap local-user rta password simple rta
# Add Serial 1/0/1 to the Mp-group interface.
[RouterA-Serial1/0/1]
[RouterA-Serial1/0/1]
ppp mp mp-group0/0/1
quit
Step 2
Configure Router B.
# Add the username and password of Router A to the local user list of Router B.
[RouterB] aaa
[RouterB-aaa] local-user rta password simple rta
[RouterB-aaa] quit
# Create an Mp-group interface and configure the corresponding IP address.
[RouterB] interface mp-group0/0/2
[RouterB-Mp-group0/0/2] ip address 111.1.1.2 255.255.255.0
[RouterB-Mp-group0/0/2] quit
# Configure Serial 2/0/0 and perform the PAP authentication.
[RouterB] interface serial2/0/0
[RouterB-Serial2/0/0] link-protocol ppp
[RouterB-Serial2/0/0] ppp authentication-mode pap
[RouterB-Serial2/0/0] ppp pap local-user rtb password simple rtb
# Add Serial 2/0/0 to the Mp-group interface.
[RouterB-Serial2/0/0] ppp mp mp-group0/0/2
[RouterB-Serial2/0/0] quit
# Configure Serial 2/0/1 and perform the PAP authentication.
[RouterB] interface serial2/0/1
[RouterB-Serial2/0/1] link-protocol ppp
[RouterB-Serial2/0/1] ppp authentication-mode pap
[RouterB-Serial2/0/1] ppp pap local-user rtb password simple rtb
# Add Serial 2/0/1 to the Mp-group interface.
[RouterB-Serial2/0/1] ppp mp mp-group0/0/2
[RouterB-Serial2/0/1] quit
Step 3
Bind the sub-tunnel.
# Restart the sub-tunnel on Router A.
[RouterA] interface serial1/0/0
[RouterA-Serial1/0/0] shutdown
[RouterA-Serial1/0/0] undo shutdown
[RouterA-Serial1/0/0] quit
[RouterA] interface serial1/0/1
[RouterA-Serial1/0/1] shutdown
[RouterA-Serial1/0/1] undo shutdown
[RouterA-Serial1/0/1] quit
# Restart the sub-tunnel on Router B.
6-56
Nortel Networks Inc.
Issue 5.3 (30 March 2009)