Configuration files – Nortel Networks 8000 User Manual
Page 433
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
10 Low-speed ATM configuration
[RouterC-Atm1/0/0] pvc to_adsl_a 0/60
[RouterC-atm-pvc-Atm1/0/0-0/60-to_adsl_a]
[RouterC-atm-pvc-Atm1/0/0-0/60-to_adsl_a]
[RouterC-Atm1/0/0] pvc to_adsl_b 0/61
[RouterC-atm-pvc-Atm1/0/0-0/61-to_adsl_b]
map bridge virtual-ethernet 1/1/0
quit
map bridge virtual-ethernet 1/1/1
Step 2
Verify the configuration.
# Check the PVC status information on Router C.
[RouterC] display atm pvc-info
VPI/VCI |STATE|PVC-NAME
|INDEX
ENCAPIPROT |INTERFACE
0/60
0/61
—End
|UP |to_adsl_a
|UP |to adsl b
60
61
| SNAP
| SNAP
I ETH
I ETH
|Atm1/0/0 (UP)
|Atm1/0/0 (UP)
Configuration files
Configuration file of Router C
#
sysname RouterC
#
radius-server template shiva
radius-server authentication 100.1.1.1 1645
#
interface Virtual-Template10
ppp authentication-mode pap
ip address 202.38.160.1 255.255.255.0
#
interface Virtual-Template11
ppp authentication-mode pap
ip address 202.38.161.1 255.255.255.0
#
interface Atm1/0/0
pvc to_adsl_a 0/60
map bridge Virtual-Ethernet1/1/0
pvc to_adsl_b 0/61
map bridge Virtual-Ethernet1/1/1
#
interface Virtual-Ethernet1/1/0
pppoe-server bind Virtual-Template 10
#
interface Virtual-Ethernet1/1/1
pppoe-server bind Virtual-Template 11
#
aaa
authentication-scheme default
authentication-scheme radius
authentication-mode radius
return
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
10-47