Nortel Networks 8000 - Manual (Page 329)

Nortel Secure Router 8000 Series
Configuration -WAN Access 8 Frame relay configuration
• Before configuring the hello packet parameters of the MFR bundle link, complete the
following tasks:
- Configuring physical parameters for FR interfaces
- Creating and configuring the MFR interface
- Bundling the current interface onto the specified MFR interface
Data preparation
To configure MFR bundle and bundle link identifiers, you need the following data.
No Data
1 Interface number of the MFR interface required for configuring the MFR bundle
identifier
2 Interface number of FR interfaces required for configuring the MFR bundle link
identifier
To configure hello packet parameters of the MFR bundle link, you need the following data.
No Data
1 Interface number of FR interfaces
2 Interface number of the MFR interface
3 Hello packet sending period of MFR bundle link MFR, waiting time before MFR
bundle link resends hello packets, and the maximum times that MFR bundle link
can resend hello packet
procedures
No. Procedure
1 Configuring MFR bundle identifier
2 Configuring MFR bundle link identifier
3 Configuring hello packet parameters of MFR bundle link
4 Checking the configuration
8.11.2 Configuring MFR bundle identifier
Do as follows on the routers:
Step 1 Run:
system-view
The system view appears.
Issue 5.3 (30 March 2009) Nortel Networks Inc. 8-39