Nortel Networks 8000 - Manual (Page 310)

8 Frame relay configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
8.4.4 Checking the configuration
Run the following commands to check the previous configuration.
Action Command
Check statistics about the FR
RARP.
display fr inarp-info [ interface interface-type
interface-number ]
Check the status and configuration
of the MFR interface.
display interface mfr [ interface-number ] [ |
{ begin | exclude | include } regular-expression ]
Run the display fr inarp-info command. When statistics about the FR RARP appears the
configuration succeeds. For example:
display fr inarp-info
Frame relay InverseARP statistics for interface MFR6/0/0 (DTE)
In ARP request Out ARP reply Out ARP request In ARP reply
5 5 5 5
Frame relay InverseARP statistics for interface Serial6/0/0 (DTE)
In ARP request Out ARP reply Out ARP request In ARP reply
0 0 0 0
Run the display interface mfr command. When the configuration of the MFR interface
appears the configuration succeeds.
display interface mfr
MFR6/0/0 current state : UP
Line protocol current state : UP
Description : HUAWEI, Quidway Series, MFR6/0/0 Interface
The Maximum Transmit Unit is 1500 bytes, Hold timer is 10(sec)
Internet Address is 100.1.1.2/24
Link layer protocol is FR IETF
LMI DLCI is 0, LMI type is Q.933a, frame relay DTE
LMI status enquiry sent 11, LMI status received 11
LMI status timeout 0, LMI message discarded 0
Physical is MFR, baudrate: 64000
QoS max-bandwidth : 64 Kbps
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/1000/0
Output queue : (FIFO queue : Size/Length/Discards) 0/256/0
Traffic statistics:
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Input :0 packets, 0 bytes, 0 drops
Output:0 packets, 0 bytes, 0 drops
8-20 Nortel Networks Inc. Issue 5.3 (30 March 2009)