Nortel Networks 8000 - Manual (Page 277)

7 LAPB and X.25 configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
system-view
[RouterB] interface serial 1/0/0
# Encapsulate X.25 DCE.
[RouterB-serial1/0/0] link-protocol x25 dce ietf
# Configure an X.121 address.
[RouterB-Serial1/0/0] x25 x121-address 1002
# Configure an IP address.
[RouterB-Serial1/0/0] ip address 16.16.16.2 255.255.0.0
# Configure map multi-protocol.
[RouterB-Serial1/0/0] x25 map ip 16.16.16.1 compressedtcp 16.16.16.1 x121-address 1001
Step 3 Verify the configuration.
# Run the ping command to view that the two ends can successfully ping each other.
ping 16.16.16.2
PING 16.16.16.2: 56 data bytes, press CTRL_C to break
Reply from 16.16.16.2
Reply from 16.16.16.2
Reply from 16.16.16.2
Reply from 16.16.16.2
Reply from 16.16.16.2
bytes=56 Sequence=1 ttl=255 time=110 ms
bytes=56 Sequence=2 ttl=255 time=50 ms
bytes=56 Sequence=3 ttl=255 time=20 ms
bytes=56 Sequence=4 ttl=255 time=30 ms
bytes=56 Sequence=5 ttl=255 time=20 ms
-- 16.16.16.2 ping statistics ----
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 20/46/110 ms
—End
Configuration files
• Configuration file of Router A
#
sysname RouterA
#
interface Serial1/0/0
link-protocol x25
x25 x121-address 1001
x25 map ip 16.16.16.2 compressedtcp 16.16.16.2 x121-address 1002
ip address 16.16.16.1 255.255.0.0
#
return
• Configuration file of Router B
#
sysname RouterB
#
interface Serial1/0/0
link-protocol x25 dce
7-74 Nortel Networks Inc. Issue 5.3 (30 March 2009)