Frame relay configuration, About this chapter, 8 frame relay configuration -1 – Nortel Networks 8000 User Manual
Page 291
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
8 Frame relay configuration
8
Frame relay configuration
About this chapter
The following table shows the contents of this chapter.
Section
Description
8.1 Introduction
This section describes concepts and fundamentals of FR.
This section describes how to configure FR.
See Example for connecting LANs through the frame
relay network.
8.3 Configuring frame relay
static address mapping
This section describes how to configure FR static address
mapping.
See Example for connecting LANs through the private
This section describes how to configure an MFR
interface.
See Example for configuring MFR.
LMI type and related
parameters
This section describes how to configure FR LMI.
8.6 Configuring frame relay
switching
This section describes how to configure FR switching.
See:
• Example for configuring the frame realy switching
PVC.
• Example for configuring the backup of frame relay over
IP.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
8-1