Configuration files, 4 example for binding mps into the mp-group, Networking requirements – Nortel Networks 8000 User Manual
Page 180: 4 example for binding mps into the mp-group -54, Example for binding mps into the mp-group
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6 PPP and MP configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
96 packets input, 1546 bytes
97 packets output, 1568 bytes
—End
Configuration files
•
Configuration file of Router A
#
sysname RouterA
#
interface Pos1/0/0
link-protocol ppp
ppp authentication-mode chap
ppp chap user rta
ip address 10.110.0.1 255.255.255.0
#
aaa
local-user rtb password simple hello
#
return
•
Configuration file of Router B
#
sysname RouterB
#
interface Pos1/0/0
link-protocol ppp
ppp authentication-mode chap
ppp chap user rtb
ip address 10.110.0.2 255.255.255.0
#
aaa
local-user rta password simple hello
#
return
6.12.4 Example for binding MPs into the MP-group
Networking requirements
You connect the two serial interfaces of Router A and Router B respectively with each other,
and bind MP group to configure MP binding.
Figure 6-3
Networking diagram of the MP-group binding
Mp-group0/0/1 Mp-group0/0/2
111.1.1.1/24
111.1.1.2/24
Serial1/0/0____________________ Serial2/0/0^^^
Serial1/0/1
RouterA
Serial2/0/1
RouterB
6-54
Nortel Networks Inc.
Issue 5.3 (30 March 2009)