Nortel Networks Mediant TP-1610 SIP User Manual

Nortel Networks Hardware

Mediant™ 2000 & TP-1610 SIP

User’s Manual

Version 4.4

Document #: LTRT-72504

Table of contents

Document Outline

1. Overview
- Available Configurations
- SIP Overview
- Mediant 2000 Features
2. Mediant 2000 Physical Description
- General
- The Mediant 2000 Chassis
  - Power Supply
- The TP-1610 Board
  - Board Hot-Swap Support
    - Removing Boards
    - Inserting Boards
  - TP-1610 Front Panel LED Indicators
- Rear Transition Module
- Optional CPU Board
3. Installing the Mediant 2000
- Unpacking
- Package Contents
- Mounting the Mediant 2000
  - Mounting the Mediant 2000 on a Desktop
  - Installing the Mediant 2000 in a 19-inch Rack
- Cabling the Mediant 2000
4. Getting Started
- Assigning the Mediant 2000 IP Address
  - Assigning an IP Address Using HTTP
  - Assigning an IP Address Using BootP
- Restoring Networking Parameters to their Initial State
- Configuring the Mediant 2000 Basic Parameters
5. Web Management
- Configuration Concepts
- Overview of the Embedded Web Server
- Computer Requirements
- Password Control
  - Embedded Web Server Username & Password
- Configuring the Web Interface via the ini File
  - Limiting the Embedded Web Server to Read-Only Mode
  - Disabling the Embedded Web Server
- Accessing the Embedded Web Server
  - Using Internet Explorer to Access the Embedded Web Server
- Getting Acquainted with the Web Interface
- Protocol Management
- Advanced Configuration
- Status & Diagnostic
- Software Update Menu
- Save Configuration
- Resetting the Mediant 2000
6. ini File Configuration of the Mediant 2000
- Secured ini File
- Modifying an ini File
- The ini File Content
- The ini File Structure
  - The ini File Structure Rules
- The ini File Example
- Basic, Logging, Web and RADIUS Parameters
- SNMP Parameters
- SIP Configuration Parameters
- ISDN and CAS Interworking-Related Parameters
- Number Manipulation and Routing Parameters
- E1/T1 Configuration Parameters
- Channel Parameters
  - Dynamic Jitter Buffer Operation
- Configuration Files Parameters
7. Configuration Files
- Configuring the Call Progress Tones
  - Format of the Call Progress Tones Section in the ini File
- Prerecorded Tones (PRT) File
  - PRT File Format
- Voice Prompts File
- CAS Protocol Configuration Files
8. Gateway Capabilities Description
- Proxy or Registrar Registration Example
- Redirect Number and Calling Name (Display)
- ISDN Overlap Dialing
- Using ISDN NFAS
  - NFAS Interface ID
  - Working with DMS-100 Switches
- Configuring the DTMF Transport Types
- Configuring the Gateway’s Alternative Routing (based on Conn
- Working with Supplementary Services
  - Call Hold and Retrieve Features
  - Call Transfer
- TDM Tunneling
  - Implementation
- Call Detail Report
- Trunk to Trunk Routing Example
- SIP Call Flow Example
- SIP Authentication Example
- Nortel IMS Specific Features and Configuration
9. Diagnostics
- Mediant 2000 Self-Testing
- Syslog Support
  - Syslog Servers
  - Operation
10. BootP/DHCP Support
- Startup Process
- DHCP Support
- BootP Support
  - Upgrading the Mediant 2000
  - Vendor Specific Information Field
11. SNMP-Based Management
- About SNMP
- Carrier Grade Alarm System
  - Active Alarm Table
  - Alarm History
- Cold Start Trap
- Third-Party Performance Monitoring Measurements
- TrunkPack-VoP Series Supported MIBs
- SNMP Interface Details
- SNMP Manager Backward Compatibility
- AudioCodes’ Element Management System
12. Selected Technical Specifications
A. Mediant 2000 SIP Software Kit
B. The BootP/TFTP Configuration Utility
- When to Use the BootP/TFTP
- An Overview of BootP
- Key Features
- Specifications
- Installation
- Loading the cmp File, Booting the Device
- BootP/TFTP Application User Interface
- Function Buttons on the Main Screen
- Log Window
- Setting the Preferences
  - BootP Preferences
  - TFTP Preferences
- Configuring the BootP Clients
- Managing Client Templates
C. RTP/RTCP Payload Types and Port Allocation
- Payload Types Defined in RFC 1890
- Defined Payload Types
- Default RTP/RTCP/T.38 Port Allocation
D. Fax and Modem Transport Modes
- Fax/Modem Settings
E. Mediant 2000 Clock Settings
F. Customizing the Mediant 2000 Web Interface
- Replacing the Main Corporate Logo
  - Replacing the Main Corporate Logo with an Image File
  - Replacing the Main Corporate Logo with a Text String
- Replacing the Background Image File
- Customizing the Product Name
- Modifying ini File Parameters via the Web AdminPage
G. Accessory Programs and Tools
- TrunkPack Downloadable Conversion Utility
- PSTN Trace Utility
  - Operation
H. Software Upgrade Key
- About the Software Upgrade Key
- Backing up the Current Software Upgrade Key
- Loading the Software Upgrade Key
  - Loading the Software Upgrade Key Using the Embedded Web Serv
  - Loading the Software Upgrade Key Using BootP/TFTP
- Verifying that the Key was Successfully Loaded
- Troubleshooting an Unsuccessful Loading of a Key
- Abort Procedure
I. Release Reason Mapping
J. SS7 Tunneling
- MTP2 Tunneling Technology
- SS7 Characteristics
- SS7 Parameters
- SS7 Table Parameters
- SS7 MTP2 Tunneling ini File Example
- ini File Parameters in a Table Format
K. RADIUS Billing and VXML Calling Card Application
- Benefits
- Features
- Supported Architecture
- Implementation
  - Basic Calling Card IVR Scenario
  - Call Flow Description
- Operation & Configuration
- Configuration Parameters
- Supported RADIUS Attributes
- RADIUS Server Messages
- Voice XML Interpreter
  - Features
- Supported Elements & Attributes
- Provided Calling Card System
  - Voice Prompts
  - VXML Flow Chart
- VXML Script Example
L. SNMP Traps
- Alarm Traps
M. Regulatory Information