Nortel Networks 8000 - Manual (Page 33)

Nortel Secure Router 8000 Series
Configuration -WAN Access 1 WAN access overview
Interface Command Line
View Command Prompt
CT1 interface CT1 interface
view
Run the controller t1
1/0/0 command in the
system view.
[Nortel-Tl 1/0/0]
CE3 interface CE3 interface
view
Run the controller e3
1/0/0 command in the
system view.
[Nortel-E3 1/0/0]
POS interface POS interface
view Run the interface pos
3/0/0 command in the
system view.
[Nortel-Pos 3/0/0]
CPOS interface CPOS interface
view
Run the controller
cpos 3/0/0 command
in the system view.
[Nortel-Cpos 3/0/0]
ATM interface ATM interface
view Run the interface
atm 2/0/0 command
in the system view.
[Nortel-Atm 2/0/0]
Table 1-2 Command line views and prompts of WAN logical interfaces
Interface Command Line
View
Command Prompt
Sub-interface Sub-interface
view
Run the
interface atm
1/0/0.1 command
in the system
view.
[Nortel-Atml1/0/0.1]
Virtual-Template
interface
Virtual-Template
interface view
Run the
interface
virtual-template
0 command in
the system view.
[Nortel-Virtual-Template0
]
MP-group interface MP-group
interface view
Run the
interface mp
group 0/0/1 in
the system view.
[Nortel-Mp-group0/0/1]
Virtual-Ethernet
interface
Virtual-Ethernet
interface view
Run the
interface
virtual-ethernet
0/0/1 command
in the system
view.
[Nortel-Virtual-Ethernet0/
0/1]
Issue 5.3 (30 March 2009) Nortel Networks Inc. 1-3