Nortel Networks 8000 User Manual
Page 186
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6 PPP and MP configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
# Configure Serial 1/0/1.
[RouterA] interface serial 1/0/1
[RouterA-Serial1/0/1]
[RouterA-Serial1/0/1]
[RouterA-Serial1/0/1]
[RouterA-Serial1/0/1]
[RouterA-Serial1/0/1]
[RouterA-Serial1/0/1]
ip address 8.1.2.2 255.255.255.0
link-protocol ppp
ppp mp virtual-template 1
shutdown
undo shutdown
quit
Step 2
Configure Router B.
# Create and configure the VT.
[RouterB] interface Virtual-Template 1
[RouterB-Virtual-Template1] ip address 8.1.1.2 255.255.255.0
[RouterB-Virtual-Template1] quit
# Configure Serial 1/0/0.
[RouterB] interface serial1/0/0
[RouterB-Serial1/0/0] link-protocol ppp
[RouterB-Serial1/0/0] ppp mp virtual-template 1
[RouterB-Serial1/0/0] quit
# Configure Serial 1/0/1.
[RouterB] interface serial 1/0/1
[RouterB-Serial1/0/1] link-protocol ppp
[RouterB-Serial1/0/1] ppp mp virtual-template 1
[RouterB-Serial1/0/1] quit
Step 3
Restart the bound sub-tunnel.
# Restart the sub-tunnel on Router A.
[RouterA] interface serial1/0/0
[RouterA-Serial1/0/0] shutdown
[RouterA-Serial1/0/0] undo shutdown
[RouterA-Serial1/0/0] quit
[RouterA] interface serial1/0/1
[RouterA-Serial1/0/1] shutdown
[RouterA-Serial1/0/1] undo shutdown
[RouterA-Serial1/0/1] quit
# Restart the sub-tunnel on Router B.
[RouterB] interface serial1/0/0
[RouterB-Serial1/0/0] shutdown
[RouterB-Serial1/0/0] undo shutdown
[RouterB-Serial1/0/0] quit
[RouterB] interface serial1/0/1
[RouterB-Serial1/0/1] shutdown
[RouterB-Serial1/0/1] undo shutdown
[RouterB-Serial1/0/1] quit
6-60
Nortel Networks Inc.
Issue 5.3 (30 March 2009)