Networking requirements, Configuration roadmap, This s – Nortel Networks 8000 User Manual
Page 339
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Nortel Secure Router 8000 Series
Configuration -WAN Access
8 Frame relay configuration
interface Serial1/0/0
link-protocol fr
#
interface Serial1/0/0.1
fr map ip 202.38.163.251 70
fr dlci 70
ip address 202.38.163.252 255.255.255.0
#
return
•
Configuration file of Router C
#
sysname RouterC
#
interface Serial1/0/0
link-protocol fr
#
interface Serial1/0/0.1
fr map ip 202.38.164.251 80
fr dlci 80
ip address 202.38.164.252 255.255.255.0
#
return
8.14.2 Example for connecting LANs through the private line
Networking requirements
As shown in Figure 8-6, you directly connect two routers through a serial interface. Router A
works in the FR DCE mode, and Router B works in the FR DTE mode.
Figure 8-6
Connecting LANs through private line
RouterA
RouterB
Serial1/0/0
IP:202.38.163.251/24
Serial1/0/0
IP:202.38.163.252/24
DLCI=100
Configuration roadmap
The configuration roadmap is as follows:
1.
Configure the link protocol to FR.
2.
Configure the working mode of the interface.
3.
Configure the V C number of the network.
4.
Configure the address map of the interface.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
8-49