Bind the channel to the bundle group, Restart the channel, For the high-speed cpos interface, do as follows – Nortel Networks 8000 User Manual

Page 92

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Nortel Secure Router 8000 Series

Configuration -WAN Access

4 POS and CPOS interface configuration

Configure Router A.

# Create a channel on the CPOS interface.

system-view

[RouterA] controller cpos 3/0/1

[RouterA-Cpos3/0/1]

clock master

e1 1 channel-set 1 timeslot-list 1-10

e1 2 channel-set 2 timeslot-list 11-15

e1 3 channel-set 3 timeslot-list 16-20

e1 4 channel-set 4 timeslot-list 21-30

e1 1 set clock master

e1 2 set clock master

e1 3 set clock master

e1 4 set clock master

quit

# Configure a bundle group and the terminal authenticator.

[RouterA] interface mp-group 0/0/3

[RouterA-Mp-group0/0/3] discriminator

[RouterA-Mp-group0/0/3] quit

# Bind the channel to the bundle group.

[RouterA] interface serial 3/0/1/1:1

[RouterA-Serial3/0/1/1:1] ppp mp mp-group 0/0/3

[RouterA-Serial3/0/1/1:1] quit

[RouterA] interface serial 3/0/1/2:2

[RouterA-Serial3/0/1/2:2] ppp mp mp-group 0/0/3

[RouterA-Serial3/0/1/2:2] quit

[RouterA] interface serial 3/0/1/3:3

[RouterA-Serial3/0/1/3:3] ppp mp mp-group 0/0/3

[RouterA-Serial3/0/1/3:3] quit

[RouterA] interface serial 3/0/1/4:4

[RouterA-Serial3/0/1/4:4] ppp mp mp-group 0/0/3

[RouterA-Serial3/0/1/4:4] quit

# Restart the channel.

[RouterA] interface serial 3/0/1/1:1

[RouterA-Serial3/0/1/1

shutdown

undo shutdown

quit

[RouterA] interface serial 3/0/1/2:2

[RouterA-Serial3/0/1/2

shutdown

undo shutdown

quit

[RouterA] interface serial 3/0/1/3:3

[RouterA-Serial3/0/1/3

shutdown

undo shutdown

quit

[RouterA] interface serial 3/0/1/4:4

[RouterA-Serial3/0/1/4

shutdown

undo shutdown

quit

For the high-speed CPOS interface, do as follows:

Issue 5.3 (30 March 2009)

Nortel Networks Inc.

4-31