Configuration, Procedures – Nortel Networks 8000 User Manual
Page 471
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12 PPPoE configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
Configuration
No.
Data
3
The maximum number of PPPoE sessions that can be set up the on the local
system
procedures
No.
Procedure
1
Configuring to log the state changes of PPPoE users
2
Setting the maximum number of sessions available on a local MAC address
3
Setting the maximum number of sessions available on a peer MAC address
4
Setting the maximum number of sessions available on the local system
5
12.3.2 Configuring to log the state changes of PPPoE users
Do as follows on the routers:
Step 1
Run:
system-view
The system view appears.
Step 2
Run:
pppoe up-down-log enable
The command logs the change in the status of PPPoE users.
—End
12.3.3 Setting the maximum number of sessions available on a
local MAC address
Do as follows on the routers:
Step 1
Run:
system-view
The system view appears.
Step 2
Run:
pppoe-server max-sessions local-mac number
The command configures the maximum number of sessions that can be set up on a local MAC
address.
12-6
Nortel Networks Inc.
Issue 5.3 (30 March 2009)