Nortel Networks 8000 - Manual (Page 258)

Nortel Secure Router 8000 Series
Configuration -WAN Access 7 LAPB and X.25 configuration
Interface: Serial1/0/0.2(protocol status is UP)
Ip address:ip 20.1.1.1 X.121 address:300
Map-type: SVC_MAP VC-number: 1
Facility:
Interface: Serial1/0/0.1(protocol status is UP)
Ip address:ip 10.1.1.1 X.121 address:200
Map-type: SVC_MAP VC-number: 1
Facility:
# Display the VC information about Router A
display x25 vc
Interface: Serial1/0/0.2
SVC 1
State: P4
Map: ip 20. 1. 1. 1 to 300
Window size: input 2 output 2
Packet Size: input 128 output 128
Local PS: 2 Local PR: 2 Remote PS: 1 Remote PR: 2
Local Busy: FALSE Reset times: 0
Input/Output:
DATA 10/10 INTERRUPT 0/0
RR 2/0 RNR 0/0 REJ 0/0
Bytes 840/840
Snd Queue(Current/Max): 0/200
Interface: Serial1/0/0.1
SVC 2
State: P4
Map: ip 10. 1. 1. 1 to 200
Window size: input 2 output 2
Packet Size: input 128 output 128
Local PS: 2 Local PR: 2 Remote PS: 1 Remote PR: 2
Local Busy: FALSE Reset times: 0
Input/Output:
DATA 10/10 INTERRUPT 0/0
RR 2/0 RNR 0/0 REJ 0/0
Bytes 840/840
Snd Queue(Current/Max): 0/200
# Display information about the X25 switching.
display x25 switch-table svc static
Number Destination Substitute-src Substitute-dst CUD SwitchTo(type/name)
100
200
300
I/Serial1/0/0
I/Serial1/0/1
I/Serial1/0/2
Total of static svc is 3.
The item type of SwitchTo meaning:
I: interface H: hunt-group T: xot
display x25 switch-table svc dynamic
#1 (In: Serial1/0/2 - SVC1024) <—> (Out: Serial1/0/0
#2 (In: Serial1/0/1 - SVC1024) <—> (Out: Serial1/0/0
—End
SVC1
SVC2
Issue 5.3 (30 March 2009) Nortel Networks Inc. 7-55