Maxim Integrated MAXQ7667 - Manual (Page 47)

4-3 ___________________________________________________________________________________________________________
MAXQ7667 User’s Guide
SECTION 4: REGISTER DESCRIPTIONS
4.1 System Register Descriptions
The MAXQ7667 system register map is shown in Table 4-1. The system register bit functions and reset value are shown in Table 4-2.
Those registers defined in the MAXQ7667 system register map are described in the following sections. The address for each register
are given in the format module[index], where module is the module specifier from 8h to Fh and index is the register subindex from 0h
to Fh.
Table 4-1. MAXQ7667 System Register Map
MODULE NAME (BASE SPECIFIER)
CYCLES TO
READ
CYCLES TO
WRITE
REGISTER
INDEX
AP (8h) A (9h) PFX (Bh) IP (Ch) SP (Dh) DPC (Eh) DP (Fh)
1 1 0h AP A[0] PFX[0] IP
1 1 1h APC A[1] PFX[1] SP
1 1 2h A[2] PFX[2] IV
1 1 3h A[3] PFX[3] OFFS DP[0]
1 1 4h PSF A[4] PFX[4] DPC
1 1 5h IC A[5] PFX[5] GR
1 1 6h IMR A[6] PFX[6] LC[0] GRL
1 1 7h A[7] PFX[7] LC[1] BP DP[1]
1 2 8h SC A[8] GRS
1 2 9h A[9] GRH
1 2 Ah A[10] GRXL
1 2 Bh IIR A[11] FP
1 2 Ch A[12]
1 2 Dh A[13]
1 2 Eh CKCN A[14]
1 2 Fh WDCN A[15]
Note: Names that appear in italics indicate that all bits of a register are read-only. Names that appear in bold indicate that a register is 16 bits wide.