Allied Telesis AT-S70 - Manual (Page 94)

Chapter 6: Monitoring System Performance
94
Using the System Diagnostics
The AT-S70 management software can run a series of diagnostic self-
tests on the chassis and line cards. The following section describes how to
run chassis diagnostics. This information can help you diagnose
performance problems with the chassis.
The diagnostic command displays the status of the following items:
ˆ Flash PROM
ˆ Serial interface
ˆ Power supply
ˆ Optional power supply (if installed)
ˆ Operational status, speed, temperature and power of the fan modules
The diagnostic tests also display the following:
ˆ Management Software Image Version and Cycle Number
ˆ Line card MAC address
ˆ Line card Serial number
ˆ Converteon™ chassis model
ˆ Running and current times
To run the chassis diagnostics, perform the following procedure:
1. From the Main Menu, select Administration.
The Administration Menu is displayed, as shown in Figure 6 on page
38.
2. From the Administration Menu, select Diagnostics.