Allied Telesis AT-S70 - Manual (Page 71)

AT-S70 Management Software User’s Guide
71
The following prompt is displayed:
Changing the Operation Mode will reset the line card.
Change Operation Mode now? (Yes or No):
7. Type Y for Yes or N for No. and press .
The Module Status and Configuration Menu is redisplayed and the
module designation is shown as “Resetting” until the reset is complete.
When the reset is complete, the new operating mode is displayed in
the OpMode column.
8. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
9. From the System Configuration Menu, select Save Configuration
File.