Allied Telesis AT-S70 - Manual (Page 235)

AT-S70 Management Software User’s Guide
235
Loading SNMPv3 Configuration
To load the new changes made to the SNMPv3 Configuration, perform the
following procedure:
1. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
2. From the System Configuration menu, select SNMPv3
Configurations.
The SNMPv3 Configurations menu is displayed, as shown in Figure 61
on page 147.
3. From the SNMPv3 Configurations menu, select Load SNMPv3
Configuration.
The following prompt is displayed:
Do you want to load SNMPV3 Configuration? (Yes or No):
4. Type Y to load the new SNMPv3 configurations, or type N to cancel
the changes.