Allied Telesis AT-S70 - Manual (Page 120)

Chapter 8: Operations, Administration, and Maintenance (OAM)
120
Displaying OAM Information and Statistics
This section contains the following procedures for displaying the OAM
information and statistics for a local or remote module:
ˆ “Displaying OAM Information for a Local Module Port,” next
ˆ “Displaying OAM Information for a Remote Module Port” on page 125
Displaying OAM
Information for a
Local Module
Port
To display the status on the local OAM, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu is displayed, as shown in
Figure 46 on page 115.
2. Select the line card whose OAM information you want to display.
3. Press .
The Module Configuration Menu is displayed, as shown in Figure 47
on page 116.
4. Select the port whose OAM information you want to display.
5. Press .
The Port Management Menu is displayed, as shown in Figure 48 on
page 116.
6. From the Port Management Menu, select OAM Configurations.
The OAM Configuration Menu is displayed, as shown in Figure 49 on
page 117.
7. From the OAM Configuration Menu, select the Show Local OAM
Information Menu.