Allied Telesis AT-S70 - Manual (Page 76)

Chapter 5: Working with Line Cards
76
The Module Status and Configuration Menu is displayed, as shown in
Figure 12 on page 53.
2. Select the AT-CM70S line card whose information you want to
change.
3. Press .
The Module Configuration Menu is displayed, as shown in Figure 13
on page 55.
4. From the Module Configuration Menu, select TDM LIU (T1/E1)
Configuration.
The TDM Management Menu is displayed, as shown in Figure 24.
Figure 24. TDM Management Menu
5. From the TDM Management Menu, select TDM Port Configurations.
TDM Management Menu
Module 15, Port C
TDM Port Configurations
UART Configurations
Return to Module Configuration Menu ...