Allied Telesis AT-S70 - Manual (Page 241)

AT-CV5000 Media Converter Chassis Installation Guide
241
Downloading the AT-S70 Software Image File
The AT-S70 software image file is provided in a self-extracting
compressed file which also contains several other files. The software
image file has an .IMG extension. This is the one to be used in the
upgrade procedures.
Note
There are two different image files used with the Converteon™
products, the image file used to update the software on the
management card is “ATS70.img” and the image file used for the
line cards differs depending upon the line card. For instructions on
downloading the AT-S70 image file, refer to “Downloading the AT-
S70 Software Image File,” next.
Caution
Downloading a new AT-S70 image file or configuration file will cause
a chassis to reset. Some network traffic may be lost.
This section contains the following procedures:
ˆ “Downloading the AT-S70 Software Image File Using TFTP,” next
ˆ “Downloading the AT-S70 Software Image File Using Xmodem” on
page 243
Downloading the
AT-S70 Software
Image File Using
TFTP
To download a new AT-S70 software image onto the chassis using TFTP,
perform the following procedure:
1. Establish a local or remote management session on the chassis where
you intend to download the new management software.
2. From the Main Menu, select Image Download.