Allied Telesis AT-S70 - Manual (Page 117)

AT-S70 Management Software User’s Guide
117
The OAM Configuration Menu is displayed, as shown in Figure 49.
Figure 49. OAM Configuration Menu
7. From the OAM Configuration Menu, select OAM Configuration.
The OAM Configuration submenu is displayed, as shown in Figure 50.
Figure 50. OAM Configuration Submenu
The OAM Configuration submenu items and options are described
below:
Admin State
Indicates the current status of the OAM administration. Possible values
are:
OAM Configuration
Module 4, Port A
OAM Configuration
Show Local OAM Information
Show Remote OAM Information
Show OAM Statistics
OAM Loopback Test
Send OAM Variable Request
Return to Port Management Menu ...
OAM Configuration
Module 4, Port A
Admin State Enabled
Mode Active
Maximum OAMPDU Size 1518
Unidirectional Support Yes
Loopback Support Yes
Link Event Support No
Variable Retrieval Support Yes
Return to OAM Configurations ...