Allied Telesis AT-S70 - Manual (Page 101)

AT-S70 Management Software User’s Guide
101
Displaying SFP Module Information
To view the operating specifications of an SFP module information,
perform the following procedure:
1. From the Main Menu, select Administration.
The Administration Menu is displayed, as shown in Figure 6 on page
38.
2. From the Administration Menu, select Diagnostics.
The Diagnostic Menu is displayed, as shown in Figure 38 on page 95.
3. From the Diagnostics Menu, select SFP Information.
The following prompt is displayed:
Enter LineCard Slot Number: ->
4. Enter the slot number of a line card with an SFP module.
The following prompt is displayed:
Enter LineCard Port [A or B]: ->
5. Enter the port with the SFP module whose information you want to
display.