Allied Telesis AT-S70 - Manual (Page 234)

Chapter 9: SNMPv3
234
Saving SNMPv3 Configuration
To save the changes made to the SNMPv3 Configuration, perform the
following procedure:
1. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
2. From the System Configuration menu, select SNMPv3
Configurations.
The SNMPv3 Configurations menu is displayed, as shown in Figure 61
on page 147.
The following prompt is displayed:
Do you want to save SNMPV3 Configuration? (Yes or No):
3. Type Y to save the changes to the SNMPv3 configuration, or type N to
cancel the changes.