Allied Telesis AT-S70 - Manual (Page 150)

Chapter 9: SNMPv3
150
12. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
13. From the System Configuration Menu, select Save Configuration
File.
Deleting an
SNMPv3 User
Table Entry
You may want to delete an entry from the SNMPv3 User Table. When you
delete an entry in the SNMPv3 User Table, there is no way to undelete, or
recover the entry.
To delete an entry in the SNMPv3 User Table, perform the following
procedure.
1. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
2. From the System Configuration menu, select SNMPv3
Configurations.
The SNMPv3 Configurations menu is displayed, as shown in Figure 61
on page 147.
3. From the SNMPv3 Configurations menu, select Configure SNMPv3
User Table.
The Configure SNMPv3 User Table menu is displayed, as shown in
Figure 62 on page 147.
4. From the Configure SNMPv3 User Table, select Delete SNMPv3
Table Entry.
The following prompt is displayed:
Enter User (Security) Name:
5. Enter the User Name of the User Table entry you want to delete.
The following prompt is displayed:
Do you want to Delete this table entry? (Yes or No):
6. Enter Y to delete the selected table entry or N to save the entry.
7. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.