Allied Telesis AT-S70 - Manual (Page 107)

AT-S70 Management Software User’s Guide
107
Clearing the
Event Log
To clear all the events in the event log and start fresh, perform the
following procedure:
1. From the Main Menu, select Administration.
The Administration Menu is displayed, as shown in Figure 6 on page
38.
1. From the Administration Menu, select Event Log.
The Event Log Menu window is displayed, as shown in Figure 44 on
page 105.
2. From the Event Log Menu, select Clear Event Log.
The following prompt is displayed:
Please wait while the event log is cleared...
3. When the clearing process is done, press any key to continue.