Allied Telesis AT-S70 - Manual (Page 162)

Chapter 9: SNMPv3
162
10. Type Y to create a new table entry, or type N to cancel the entry.
11. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
12. From the System Configuration Menu, select Save Configuration
File.
Deleting an
SNMPv3 View
Table Entry
You may want to delete an entry from the SNMPv3 View Table.
Note
Once an SNMPv3 View Table entry is deleted, there is no way to
undelete, or recover the entry.
To delete an entry in the SNMPv3 View Table, perform the following
procedure:
1. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
2. From the System Configuration menu, select SNMPv3
Configurations.
The SNMPv3 Configurations menu is displayed, as shown in Figure 61
on page 147.
3. From the SNMPv3 Configurations menu, select Configure SNMPv3
View Table.
The Configure SNMPv3 View Table menu is displayed, as shown in
Figure 65 on page 160.
4. From the Configure SNMPv3 View Table, select Delete SNMPv3
Table Entry.
The following prompt is displayed:
Enter View Name:
5. Enter the View Name of the View Table entry you want to delete.
The following prompt is displayed:
Enter View Subtree (OID format/Text Name):
6. Enter the subtree for this view.