Allied Telesis AT-S70 - Manual (Page 110)

Chapter 7: Event Log and Syslog Servers
110
1 Various operating systems have been found to utilize Facilities 4, 10, 13 and
14 for security/authorization, audit, and alert messages which seem to be
similar.
2. Various operating systems have been found to utilize both Facilities 9 and 15
for clock (cron/at) messages.
For example, selecting LOCAL1 as the facility level assigns the
numerical code of 17 to all events sent by the chassis to the syslog
server.
3. Press .
The selected syslog facility code is displayed.
4. Press or hit any key to continue.
5. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
6. From the System Configuration Menu, select Save Configuration
File.
16 Local use 0 (LOCAL0)
17 Local use 1 (LOCAL1)
18 Local use 2 (LOCAL2)
19 Local use 3 (LOCAL3)
20 Local use 4 (LOCAL4)
21 Local use 5 (LOCAL5)
22 Local use 6 (LOCAL6)
23 Local use 7 (LOCAL7)
Table 2. Syslog Facility Applicable RFC 3164 Numerical Codes
Numerical Code Facility