Allied Telesis AT-S70 - Manual (Page 46)

Chapter 4: Configuring Management Security Using the Omega Option
46
Configuring the Manager and Operator Passwords
The AT-S70 management software has two levels of management
access: Manager and Operator. The Manager account allows you to
configure all parameters of a Converteon™ chassis, while the Operator
account only allows you to view the parameter settings. The default login
name for Manager access is “manager” and the password is “friend”. The
default login name and password for Operator access are both “operator”.
Login names and passwords are case-sensitive.
Note
If the password is changed and forgotten, you must call Technical
Support to have it reset back to the default password. For Technical
Support contact information, refer to “Contacting Allied Telesis” on
page 13.
To prevent unauthorized access to the management program, you can
assign a password to the AT-S70 management software. Any person who
starts the interface is required to enter the password, regardless of how
they access the program.
To change the manager or operator password, perform the following
procedure:
1. From the Main Menu, select System Configuration.
The System Configuration Menu is shown in Figure 10.
Figure 10. System Configuration Menu
System Configuration Menu
System Name
System Date (mm/dd/yy) 00/00/00
System Time (hh:mm:ss) 00:17:00
Omega Options
IP Parameters
SNMPv3 Configurations
Terminal Configuration
Temperature Threshold Configuration
Save Configuration File
Return to Main Menu ...