Allied Telesis AT-S70 User Manual
Page 256

Chapter 10: File Downloads and Uploads
256
The following prompt is displayed:
Enter LineCard Slotnum: ->
4. Enter the slot number of the line card to be upgraded.
5. Press
The following prompt is displayed:
TFTP Server IP Address->
6. Enter the IP address of the TFTP server.
7. Press
The following prompt is displayed:
Image File Name->
8. Enter the filename of the image file stored on the TFTP server.
9. Press
The following prompt is displayed:
Ready to download application image through TFTP.
Warning: During Image Download Management activity is
disabled.
Do TFTP download now? (Yes or No):
10. Type Y for to start the download.
The following prompt is displayed:
Downloading Image through TFTP......1298
TFTP: Received 664120 bytes in 9.5 seconds
Verifying Checksum.... OK
Downloading Image to Line Card...... 5%
After the system has downloaded the new image, it reboots and
begins to initialize the software. The system does not forward any
network traffic during the initialization process.
Note
Wait until the software is initialized before you attempt to reestablish
your management session.