Allied Telesis AT-S70 - Manual (Page 199)

AT-S70 Management Software User’s Guide
199
The SNMPv3 Configurations menu is displayed, as shown in Figure 61
on page 147.
3. From the SNMPv3 Configurations menu, select Configure SNMPv3
Notify Table.
The Configure SNMPv3 Notify Table menu is displayed, as shown in
Figure 74 on page 196.
4. From the Configure SNMPv3 Notify Table menu, select Modify
SNMPv3 Table Entry.
The Modify SNMPv3 Notify Table menu is displayed, as shown in
Figure 75.
Figure 75. Modify SNMPv3 Notify Table Menu
Note
To display a Group Name and its associated parameters from the
Configure SNMPv3 Group Table menu, type N to display the Next
Page and P to display the previous page.
5. To modify the Notify Tag, select Set Notify Tag.
The following prompt is displayed:
Enter Notify Name:
6. Enter a Notify Name.
The following prompt is displayed:
Enter Notify Tag:
7. Enter the new Notify Tag.
Enter an alphanumeric value of up to 32 characters.
8. From the Main Menu, select System Configuration.
Converteon
Configure SNMPv3 Notify Table
Modify SNMPv3 Table Entry
Set Notify Tag
Set Notify Type
Set Storage Type
Return to Configure SNMPv3 Notify Table ...