Allied Telesis AT-S70 - Manual (Page 133)

AT-S70 Management Software User’s Guide
133
Sending an OAM Variable Request
To send an OAM variable request, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu is displayed, as shown in
Figure 46 on page 115.
2. Select the line card whose OAM variable request you want to send.
3. Press .
The Module Configuration Menu is displayed, as shown in Figure 47
on page 116.
4. Select the port whose OAM variable request you want to send.
5. Press .
The Port Management Menu is displayed, as shown in Figure 48 on
page 116.
6. From the Port Management Menu, select OAM Configurations.
The OAM Configuration Menu is displayed, as shown in Figure 49 on
page 117.
7. From the OAM Configuration Menu, select the Send OAM Variable
Request Menu.
The menu in Figure 56 is displayed.
Figure 56. Enter Branch Number Menu
8. Enter the specific package or object being returned. The default is 1.
The menu in Figure 57 is displayed.
Figure 57. Enter Leaf Number Menu
Converteon
Enter branch number [0 - 255] -
Converteon
Enter leaf number [0 - 255] ->