Allied Telesis AT-S70 - Manual (Page 258)

Chapter 10: File Downloads and Uploads
258
The following prompt is displayed:
Ready to download configuration file through TFTP.
Warning: During Download Configuration Management activ-
ity is disabled.
Do TFTP download now? (Yes or No):
8. Type Y to start the download.
The following prompt is displayed:
Downloading Configuration file through TFTP, please wait
...
After the system has downloaded the new configuration file, it reboots
the system and begins to initialize the software. The system does not
forward any network traffic during the initialization process.
Note
Wait until the software is initialized before you attempt to reestablish
your management session.
Uploading a
Configuration
File
To upload an AT-S70 software configuration file from a chassis to a TFTP
server from a local or remote management session using TFTP, perform
the following procedure:
Note
Uploading a configuration file will NOT interrupt traffic.
1. Establish a local or remote management session on the chassis where
you intend to download the new management software.
2. From the Main Menu, select Administration.
The Administration Menu, shown in Figure 6 on page 38, is displayed.
3. From the Administration Menu, select Upload Configuration
Through TFTP.
The following prompt is displayed:
TFTP Server IP Address-> _
4. Enter the IP address of the TFTP server.
5. Press .
The following prompt is displayed: