Allied Telesis AT-S70 - Manual (Page 143)

AT-S70 Management Software User’s Guide
143
group members to view the specified portion of the OID MIB table. The
Write View allows group members to write to, or modify, the MIBs in the
specified MIB view. The Notify View allows group members to send trap
messages defined by the MIB view. Lastly, you can configure a storage
type for this table entry which allows you to save this view to flash
memory.
SNMPv3 Group Table
The Configure SNMPv3 Group Table menu allows you to associate a User
Name with a security group called a Group Name. The User Name is
previously configured with the Configure SNMPv3 User Table menu. The
security group is previously configured with the Configure SNMPv3
Access Table menu. Lastly, you can configure a storage type for this table
entry which allows you to save the entry to flash memory.
SNMPv3 Notify Table
The Configure SNMPv3 Notify Table menu allows you to define the type of
message that is sent from the switch to the SNMP host. In addition, you
have the option of defining the message type as either an Inform or a Trap
message. The difference between these two types of messages is that
when a switch sends an Inform message, the switch expects a response
from the host. In comparison, the switch does not expect the host to
respond to Trap messages.
In addition, you define a Notify Tag that links an SNMPv3 Notify Table
entry to the host IP address defined in the Configure SNMPv3 Target
Address Table menu. Lastly, you can configure a storage type for this
table entry which allows you to save the entry to flash memory.
SNMPv3 Target Address Table
The Configure SNMPv3 Target Address Table menu allows you to
configure the host IP address. Also, in the same table, you configure the
values of the Tag List parameter with the previously defined Notify Tag
parameter values. The Notify Tag parameter is configured in the Configure
SNMPv3 Notify Table. In this way, the Notify and Target Address tables
are linked. Lastly, you can configure a storage type for this table entry
which allows you to save the entry to flash memory.
SNMPv3 Target Parameters Table
The Configure SNMPv3 Target Parameters Table menu allows you to
define which user can send messages to the host IP address defined in
the Configure SNMPv3 Target Address Table. The user and its associated
information is previously configured in the Configure SNMPv3 User Table,
SNMPv3 View Table, SNMPv3 Access Table, and SNMPv3 Group Table.
Lastly, you can configure a storage type for this table entry which allows
you to save the entry to flash memory.