Allied Telesis AT-S70 - Manual (Page 147)

AT-S70 Management Software User’s Guide
147
Figure 61. SNMPv3 Configurations Menu
3. From the SNMPv3 Configurations menu, select Configure SNMPv3
User Table.
The Configure SNMPv3 User Table menu is displayed, as shown in
Figure 62.
Figure 62. Configure SNMPv3 User Table menu
4. To create a new user table, select Create SNMPv3 Table Entry.
The following prompt is displayed:
Enter User (Security) Name:
SNMPv3 Configurations
Converteon
Configure SNMPv3 User Table
Configure SNMPv3 View Table
Configure SNMPv3 Access Table
Configure SNMPv3 Group Table
Configure SNMPv3 Notify Table
Configure SNMPv3 Target Address Table
Configure SNMPv3 Target Parameters Table
Save SNMPV3 Configuration
Load SNMPV3 Configuration
Return to System Configuration Menu ...
Configure SNMPv3 User Table
Converteon
Create SNMPv3 Table Entry
Delete SNMPv3 Table Entry
Modify SNMPv3 Table Entry
Display SNMPv3 Table Entry
Return to SNMPv3 Configurations ...