Allied Telesis AT-S70 - Manual (Page 194)

Chapter 9: SNMPv3
194
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
2. From the System Configuration menu, select SNMPv3
Configurations.
The SNMPv3 Configurations menu is displayed, as shown in Figure 61
on page 147.
3. From the SNMPv3 Configurations menu, select Configure SNMPv3
Group Table.
The Configure SNMPv3 Group Table menu is displayed, as shown in
Figure 71 on page 187.
4. From the Configure SNMPv3 Group Table menu, select Display
SNMPv3 Table Entry.
The Snmpv3 Group Info menu is displayed, as shown in Figure 73.
Figure 73. SNMPv3 Group Info Menu
Note
The Row Status parameter is a read-only field. The Active value
indicates the SNMPv3 User Table entry takes effect immediately.
Note
To display the SNMPv3 Group information, type N to display the
Next Group, F to display the First Group, or R to return to the
previous menu.
Converteon
Snmpv3 Group Info:
Security Model................ v1
Security Name ................ commpublic
Group Name ................... grpcommpublic
Storage Type ................. NonVolatile
Row Status ................... Active
N - Next Group, F - First Group, R - Return