Allied Telesis AT-S70 - Manual (Page 171)

AT-S70 Management Software User’s Guide
171
6. Select one of the following SNMP protocols as the Security Model for
this Group Name.
1-v1
Select this value to associate the Group Name with the SNMPv1
protocol.
2-v2c
Select this value to associate the Group Name with the SNMPv2c
protocol.
3-v3
Select this value to associate the Group Name with the SNMPv3
protocol. The SNMPv3 protocol allows you to configure the group to
authenticate SNMPv3 entities (users) and encrypt messages.
The following prompt is displayed:
Enter Security Level [A-AuthNoPriv, P-AuthPriv, N-
NoauthNoPriv]:
7. Select one of the following security levels:
A-AuthNoPriv
This option represents authentication, but no privacy protocol. Select
this security level if you want to authenticate SNMP users, but you do
not want to encrypt messages using a privacy protocol.You can select
this value if you configured the Security Model parameter with the
SNMPv3 protocol.
P-AuthPriv
This option represents authentication and the privacy protocol. Select
this security level to encrypt messages using a privacy protocol and
authenticate SNMP entities. This level provides the greatest level of
security. You can select this value if you configured the Security Model
parameter with the SNMPv3 protocol.
N-NoauthNoPriv
This option represents no authentication and no privacy protocol.
Select this security level if you do not want to authenticate SNMP
entities and you do not want to encrypt messages using a privacy
protocol. This security level provides the least security.
Note
If you have selected SNMPv1 or SNMPv2c, N-NoauthNoPriv is the
only security level you can select.
The following prompt is displayed:
Enter Read View Name: