Allied Telesis AT-S70 - Manual (Page 29)

AT-S70 Management Software User’s Guide
29
Saving the Configuration Settings
Whenever you change a setting, such as changing the speed of a port,
you must specifically save the change to the configuration file. If you do
not do so, these changes are lost when the chassis is reset or power
cycled.
To save the changes to the configuration file, perform the following
procedure:
1. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 3.
Figure 3. System Configuration Menu
2. From the System Configuration Menu, select Save Configuration
File.
The file is immediately saved and the following message is displayed:
All configuration files have been saved.
Press any key to continue...
For instructions on how to upload or download a configuration file, refer to
“Downloading or Uploading a Configuration File” on page 257.
For information about the Omega Options selection on this menu, refer to
Chapter 4, “Configuring Management Security Using the Omega Option”
on page 45.
System Configuration Menu
System Name
System Date (mm/dd/yy) 00/00/00
System Time (hh:mm:ss) 00:17:00
Omega Options
IP Parameters
SNMPv3 Configurations
Terminal Configuration
Temperature Threshold Configuration
Save Configuration File
Return to Main Menu ...