Allied Telesis AT-S70 - Manual (Page 109)

AT-S70 Management Software User’s Guide
109
module or system that produced them. This grouping helps you determine
which events belong to which device when a syslog server is collecting
events from several network devices. You can specify only one facility
code.
To specify a facility code to include in the events sent to a syslog server,
perform the following procedure:
1. From the Main Menu, select Administration.
The Administration Menu is displayed, as shown in Figure 6 on page
38.
2. From the Administration Menu, select Syslog Facility Code field and
enter a facility code to include in the events.
There are ways to use this feature. The first is to use the default code
setting “0” which is based on the functional groupings defined in the
RFC 3164 standard. The numerical codes that are applicable to the
AT-S70 management software and its modules are shown in Table 2.
Table 2. Syslog Facility Applicable RFC 3164 Numerical Codes
Numerical Code Facility
0 Kernel messages
1 User-level messages
2 Mail system
3 System daemons
4 Security/authorization messages 1
5 Messages generated internally by syslog
6 Line printer subsystem
7 Network news subsystem
8 UUCP subsystem
9 Clock daemon
2
10 Security/authorization messages
1
11 FTP daemon
12 NTP subsystem
13 Log audit
1
14 Log alert
1
15 Clock daemon 2