Allied Telesis AT-S70 - Manual (Page 187)

AT-S70 Management Software User’s Guide
187
The Configure SNMPv3 Group Table menu is displayed, as shown in
Figure 71.
Figure 71. Configure SNMPv3 Group Table Menu
4. To configure a group in the SNMPv3 Group Table, select Create
SNMPv3 Table Entry.
The following prompt is displayed:
Enter Security Name:
5. Enter the Security Name that you want to associate with a group.
Enter a Security Name that you configured in “Creating an SNMPv3
User Table Entry” on page 146.
The following prompt is displayed:
Enter Security Model [1-v1, 2-v2c, 3-v3]:
6. Select the SNMP protocol that was configured for this User Name.
Choose from the following:
1-v1
Select this value to associate the Group Name with the SNMPv1
protocol.
2-v2c
Select this value to associate the Group Name with the SNMPv2c
protocol.
3-v3
Select this value to associate the Group Name with the SNMPv3
protocol.
The following prompt is displayed:
Enter Group Name:
Configure SNMPv3 Group Table
Converteon
Create SNMPv3 Table Entry
Delete SNMPv3 Table Entry
Modify SNMPv3 Table Entry
Display SNMPv3 Table Entry
Return to SNMPv3 Configurations ...