Displaying generic line card information, Displaying general status information, Figure 12. module status and configuration menu – Allied Telesis AT-S70 User Manual
Page 53
AT-S70 Management Software User’s Guide
53
Displaying Generic Line Card Information
You can display general to specific information about the line cards using
the following procedures:
“Displaying General Status Information,” next
“Displaying Detailed Line Card Information” on page 54
“Displaying Line Card DIP Switch Settings” on page 56
Displaying
General Status
Information
To display the status of the modules and line cards in the Converteon™
chassis, perform the following procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu is displayed. The example
in Figure 12 shows an AT-CV5000 chassis.
Figure 12. Module Status and Configuration Menu
The fields are defined below:
Module
Displays the module or line card model number and its slot number.
Module Status and Configuration
Converteon
Module
Status
Link(A)
Link(B)
OpMode
1: AT-CV5M01
On
Online/100
2: AT-CM202
On
Online/100
Offline
OAM Visible
3: AT-CM202
On
Online/100
Offline
OAM Visible
4: AT-CM202
On
Online/100
Online/10
OAM Visible
5:(Not Inserted)
--
--
--
--
6: AT-CM212A/1
On
Online/100
Online/100
Line Card Mgmt
7: AT-CM212A/1
On
Online/100
Offline
Link Test
8: AT-CM212B/1
On
Online/100
Online/100
SML
9: AT-CM212B/1
On
Online/100
Online/100
SML
10:(Not Inserted)
--
--
--
--
11: AT-CV1KSS
On
Online/1000
Online/1000
Link Test
12: AT-CV1KSS
On
Online/1000
Online/1000
Link Test
13: AT-CV1KSS
On
Online/1000
Offline
Link Test
14: AT-CM2K0S
On
Online/1000
Online/1000
Link Test
15: AT-CM70S
On
Online
Online
Link Test
16:(Not Inserted)
--
--
--
--
More ...
Return to Main Menu ...