Avaya 580 - Manual (Page 92)

2-44 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 2
— TFTP Server — Copies your startup or running configuration,
or another file located on the switch, to a location on a TFTP
server.
*Note: If you select File or TFTP Server, you must also provide
the path and filename of the destination file in the Source
Destination field.
4. Enter the IP address of the source or destination TFTP server in the
TFTP Server IP Address field, if applicable.
5. Click Copy. The source configuration or file is copied to your specified
destination.
*Note: The Web Agent displays an Invalid operation!
error message if you attempt to copy one of the following:
• The current running configuration to the running
configuration.
• The startup configuration to the same startup configuration.
• The specified TFTP server to a TFTP server.
CLI Command To copy files, use the following CLI command in Enable mode:
# copy running-config +
* Note: Entering a + sign lists all of the applicable options for the copy
running-config command