Avaya 580 - Manual (Page 245)

Document No. 10-300077, Issue 2 8-23
Configuring Ports
Figure 8-8. Detailed Physical Port Configuration Web Page for Port on
Fast Ethernet Module
7. Enter a port name in the Name field, if desired or use the default name.
8. Select one of the following from the Category field pull-down menu:
— User Port if this is an end-station port
— Service Port if this is a trunk port.
9. Select a speed (10 Mb/s or 100 Mb/s) from the Speed Mode field pull
down menu, If you want to set the port speed manually. If want the port
to autonegotiate, you can ignore this field.
*Note: This feature is only available for 10/100 TX modules.