Rfc standards, Creating an snmpv3 administrator, Configuring views – Avaya 580 User Manual
Page 144: Configuring groups, Configuring an snmpv3 user, Changing a user password, Configuring snmpv1 or v2 community strings, Setting the administrative contact, Setting the physical location of the switch, Disabling or reenabling snmp
5-2
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Chapter 5
■
Creating an SNMPv3 Administrator
■
■
■
■
■
Configuring SNMPv1 or v2 Community Strings
■
Setting the Administrative Contact
■
Setting the Physical Location of the Switch
■
■
*Important: You must have administrator access to the switch to
use the CLI commands that are discussed in this
chapter.
RFC Standards
For more information on SNMPv3, see:
■
RFC 2576, “Coexistence between Version 1, Version 2, and Version
3 of the Internet-Standard Network Management Framework.”
■
RFC 3411, STD 62, “An Architecture for Describing SNMP
Management Frameworks.”
■
RFC3412, STD 62 “Message Processing and Dispatching for the
Simple Network Management Protocol.”
■
RFC 3413, STD 62, “SNMP Applications.”
■
RFC 3414, STD 62, “User-Based Security Model (USM) for
Version 3 of the Simple Network Management Protocol
(SNMPv3).”
■
RFC 3415, STD 62, “View-Based Access Control (VACM) for the
Simple Network Management Protocol (SNMP).”
■
RFC3416, STD 62 “Version 2 of the Protocol Operations for the
Simple Network Management Protocol.”
■
RFC3417, STD 62, “Transport Mappings for the Simple Network
Management Protocol.”
■
RFC3418, STD 62, “Management Information Base (MIB) for the
Simple Network Management Protocol.”