Avaya 580 - Manual (Page 479)

Document No. 10-300077, Issue 2 15-17
Configuring the OSPF Routing Protocol
3. See Table 15-5 for details about the Add OSPF Summary Web page
parameters:
4. Click CREATE to save the new OSPF summary, or CANCEL to ignore
the new summary.
CLI Command To create a new OSPF summary, use the following command:
(configure router:ospf)# area range <ip address>
[no-advertise]
Deleting OSPF Summaries
You can delete OSPF summaries using either the Web Agent or the CLI.
Web Agent
Procedure To delete an OSPF summary using the Web Agent:
1. In the navigation pane, expand the Routing > IP > OSPF folders, and
then click Summaries.
The OSPF Summaries Web page is displayed in the content pane. See
Figure 15-7 .
2. Select the OSPF summary that you want to remove.
3. Click DELETE. The OSPF summary you selected is removed.
CLI Command To delete an OSPF summary, use the following command:
(configure router:ospf)# [no] area range
address>
Table 15-5. Add OSPF Summary Web Page Parameters
Parameter Definition
Area Select the area ID of the area from which the routes are
aggregated (summary IP address).
Network Address Enter the IP address of the network to be advertised.
Mask Enter the subnet mask of the network to be advertised.
Advertise Select the ability to suppress (disable) or enable
advertisements of this summary. When suppressing,
advertisements of IP routes in this range are also
suppressed.