Avaya 580 - Manual (Page 615)

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1 21-1
21 Monitoring the Avaya
Multiservice Switch
Overview
The following information and procedures provided in this chapter pertain
to layer 2 and layer 3 module configurations:
■
Interpreting Front Panel LED Displays
■
Checking Active Alarms
■
Using the Event Subsystem
■
Configuring Syslog Event Reporting
■
Configuring Utilization Monitoring
For more information about the CLI commands that are mentioned in this
chapter, see Command Reference Guide for the Avaya P580 and P882
Multiservice Switches, Software Version 6.1.
Interpreting Front Panel LED Displays
For an explanation of the switch front-panel LEDs, see Table 21-1 .
Table 21-1. Front Panel LED Explanations
Module... LED... Behavior... Indication...
All Modules Module
Status Solid green Normal operation.
Flashing orange Diagnostic failure.
Off Module not operational or not
receiving power.
Gigabit
Modules TX/RX Flashing orange Port sending/receiving traffic.
Off Port not sending/receiving
traffic.
1 of 2