Avaya 580 - Manual (Page 535)

Document No. 10-300077, Issue 2 18-5
Configuring the IPX SAP Protocol
3. Configure an IPX SAP name filter. See Table 18-2 for an explanation of
the Add IPX SAP Name Filter Web page parameters
4. Click APPLY to save your changes, or CANCEL to restore previous
settings.
Table 18-2. IPX SAP Name Filter Web Page Parameters
Parameter Allows you to...
Interface Select the interface to which this filter will be applied to
SAP packets sent and/or received on the interface from
the pull-down menu.
Precedence Enter the filter precedence (in order of importance) with
0 equal to most important.
Note: All SAP filters on the same interface must be
assigned a unique precedence value.
Name Enter a service name. For example, FS_ENG001. A
single asterisk may be present as the last character,
which will match all remaining characters of a service
name.
Type Enter the service type that identifies the type of service
the server provides.
Well-known service types include:
• Unknown (0)
• Print Queue (3)
• File Server (4)
• Job Server (5)
• Print Server (7)
• Archive Server (9)
• Remote Bridge Server (24)
• Advertising Print Server (47)
• NetWare Directory Services [NDS] (278)
A value of ffff matches all service type values.
Direction Select the filter direction from the following
pull-down menu options:
• Inbound - Applies the filter only to SAP packets
received on the interface.
• Outbound - Applies the filter only to SAP packets
sent on the interface (Default)
• Both - Applies the filter to SAP packets both sent
and received on the interface.
1 of 2